RDS Manufacturing 60 Gallon Powder Coated Aluminum Diesel Auxiliary Tank/Toolbox Combo

Description

RDS Manufacturing 60 Gallon Powder Coated Aluminum Auxiliary Tank ToolboCombos are made in the USA and are DOT approved. Each tank comes with gas cap, drain fittings, manual sight gauge, fuel filler shroud, along with internal baffles to reduce sloshing. Toolboxes come with linked stainless steel locks that also secure the fuel fill to prevent tampering, and two lift cylinders to hold open the crowned lid. Note: Includes a Diesel Install Kit that easily connects the RDS tank to the OEM fuel tank. Not intended to be used with gasoline. Attention: Adhere to these guidelines before installation. Failure to follow these guidelines will result in voiding your warranty. The fill cap location and pump location cannot be swapped. Do not install risers between the fuel tank fitting and the pump. Do not use extension pipes to raise the height of the transfer pump. Do not install a pump over 30 lbs. to a standard duty tank. For pumps over 30 lbs., a Severe Series tank must be used. The 30 lb. limit includes pump and any other accessories such as filter kit, meters, etc. Features Gravity feed diesel to increase driving range No rust 0.125 in. heavy-duty aluminum construction Fully welded seams 100% pressure tested Built-in baffles to reduce sloshing Vehicle rollover safety valve (vent) Includes 3/8 in. NPTF(F) drain plug Toolbolid is reinforced with welded lid braces 2 gas filled lift cylinders assist in opening and holding open the toolbokit 2 stainless steel paddle opening hand, 1 locking, are linked together – lid can be opened from either side Manual sight fuel gauge included Specifications Type: Auxiliary Tank with ToolboShape: Rectangular Material: Aluminum Finish: Powder Coated Capacity: 60 Gallon Empty Weight: 96 lbs. Total Dimensions: 55 in. L 20 in. W 19 in. H Tank Dimensions: 55 in. L 20 in. W 12 3/4 in. H ToolboDimensions: 48 in. L 20 in. W 6 1/4 in. H Important Notes: Mounting tabs extend out 1 in. – adds 2 in. to total length and 1 in. to total width Always measure the truck’s bed for clearance at corners, wheel wells, etc. Downloads Installation Instructions (PDF Download) RDS DOT Permit (PDF Download)