Parker Velcon CLEANDiesel® 6 in. x 56 in. DI Coalescer Filters – 25 Micron

Description

Velcon’s DI coalescers in combination with DSO separators, contaminated fuels are cleaned to a level that meets stringent downstream fuel cleanliness standards for petroleum based diesel fuels. The first stage in the DI coalescer removes particles through an inside-out flow and coalesces emulsified water into large droplets, which then fall to the housing sump. In the second stage, an outside-in process, the DSO separator creates a hydrophobic barrier to block the coalesced water droplets from flowing downstream of the housing. This multi-stage design assures the fuel is conditioned to a clean and dry state, ready for use. Surfactants: Water coalescing is not effective in the presence of fuels containing high levels of surfactants/alcohols or unrefined biofuels Detergents and additives inhibits the ability of coalescers to effectively remove water by reducing Interfacial Tension (IFT) and can eventually disarm coalescers Features Extended equipment up-time Reduced operating costs Reliable fuel injector performance Reduced fuel system maintenance Specifications Filter Type: Coalescer Brand: CLEANDiesel® Fluid Compatibility: Petroleum Based Diesel Fuels Micron Rating: 25 – Provides effective particle removal with industry proven coalescing technology Inside Diameter: 3.5 in. Outside Diameter: 6 in. Length: 56 in. Filter Construction: Fiberglass End Cap Configuration: Threaded Base Seal Material: Buna-N pH Range: 5 – 9 – Continuous Operation Flow Rate: Depends on Fluid Viscosity and Application Maximum Burst Pressure: 75 PSI (5.2 Bar) Maximum Operating Temperature: 150°F (65°C) Changeout Pressure Differential: 25 PSI (1.7 Bar) Downstream Free-Water Level Typically Below 50 ppm DI – Coalescer Flow Direction – Inside to Outside DSO – Separator Flow Direction – Outside to Inside