Morrison Bros. 710 Series 2 in. Anti-Siphon Solenoid Valves

Description

Normally Closed, Zero-Differential Anti-Siphon Valve for Fuel & Coolant SystemsThe Morrison Bros. 710 Series 2-inch solenoid valve provides fail-safe anti-siphon protection on the dispensing side of fuel system pipelines, preventing accidental product loss if a downstream fracture occurs below the tank’s liquid level. The valve remains closed until it receives an electronic signal (like a pump or dispenser switching on) making it equally well suited as an isolation point in data center liquid cooling infrastructure, where a normally closed state protects CDU manifolds and coolant reservoirs from draining onto active IT equipment during a power loss or emergency shutdown event.The cast bronze body carries FKM (Viton) and PTFE seals rated to a maximum fluid temperature of 302°F (150°C) and handles liquids up to 60 centistokes viscosity. The hung piston design operates at zero pressure differential, making the valve reliable in low-pressure or gravity-fed loops without requiring system pressure to actuate. Integrated thermal relief bleeds expansion pressure back against the flow direction, protecting upstream components from pressure spikes. Choose the 710SS stainless steel variant with PTFE seals and a 356°F (180°C) temperature rating for glycol-based or treated-water coolant loops.Key specifications:Connection size: 2 in. NPTOrifice size: 1½ in.Operating pressure differential: 0–105 PSIMaximum fluid temperature: 302°F (150°C)Minimum operating temperature: -40°FPower consumption: 30 wattsDimensions (710-0200): 5.9 in. L × 7.0 in. H × 2.25 in. WMust be installed horizontally with solenoid coil upright and vertical100-mesh inlet strainer required to protect piston assembly from particulate contaminationNOTE: Product can only be pumped in one direction, the direction of the flow arrow. Not designed for use as an overfill prevention or process control valve.FeaturesNormally closed, hung piston designInstall in a horizontal pipeline in the upright vertical positionZero pressure differentialIntegral thermal relief allows the valve to relieve expansion pressure in the opposite direction of flowContinuous duty Class H standard coil operates at 120 voltsEnclosure is watertight and rated for hazardous locations—NEMA 3, 4X, 7 and 9; groups C and DSeveral optional coil voltages available710MO has manual override feature. Available in sizes ranging from ¾″ to 2″ for operation during a power outageRecommended for use with liquids having a maximum viscosity of 60 centistokesA strainer with a 100 mesh screen is recommended at the valve inletConstruction DetailsBody: Cast bronzeSeals: Viton®, Teflon®Solenoid housed in an integral, watertight, explosion-proof shellCertificationsCSA approved for hazardous locationsClass I, Groups C and DClass II, Groups E, F and GClass IIIT3CDownloadsInstallation Instructions (PDF Download)Spec Sheet (PDF Download)