L.B. White Premier 80 2.0 Enclosed Flame Ductible 80,000 BTU LP Heater w/Thermostat and Hose

Description

80,000 2.0  BTU LP fuel version. Premier® portable heaters can be used to provide temporary heat or simple air circulation. This portable heater can be used inside, or this temporary heat source can be ducted in from the outside. Premier heaters provide an excellent balance between direct fired fuel efficiency and enclosed flame ductible and safety. Can operate off a 20 L.B.. propane tank, very quite and portable, low voltage requirements, easy to operate with diagnostic lights. L.B. White has perfected every aspect of our portable Premier® construction heaters design to withstand harsh working environments. This has led to our reputation for reliability, durability and serviceability in the field. When the comfort and safety of your work crew is at stake-you want the leader in portable heating equipment for any commercial, industrial or construction job. See LB White’s LB50009454 Thermostat with 20 ft. cord for a replacement for the thermostat or as an option for the Thermostats with a 20 ft. cord. 
Note: If heater is to be used or installed above 2,000 feet of elevation the unit needs to be reviewed for high-altitude modifications, please provide elevation level. Contact a JME Sales Specialist at 800-333-3331 for details.
HEAT ESTIMATOR
Use the Heat Estimator calculation tool below to calculate the number of BTU’s required to warm your space based on the cubic feet and the heat differential required. The tool will also recommend specific LB White products that will meet these requirements.
Heater Estimator

Features

Heat output 80,000 BTU
Liquid propane fuel
Versatile indoor and outdoor placement of heater
Direct-fired = 99.97% fuel efficiency
High volume of air output for maximum heat distribution
Dependable, electronic spark ignition
Tri-shield finish provides superior protection against abrasion and corrosion
Easy to transport
Vent mode for circulation of air
100% test fired at our plant
Remote start thermostat standard
18 in. cord remote start thermostat standard can use on the heater.
For remote thermostat you can add an outdoor use 3-prong extension cord up to 100 ft. and connect to the heater and on other end connect thermostat. 
CSA US and Canada certified

Specifications

Minimum LP Gas Tank Size: (2) 40lb.tanks
120 Volts/ 60 Hz/ 1 Phase
Male plug-in on heater for extension cord for operation
AMP draw 2.6 Starting, 1.0 Continuous
330 CFM heated air
(1) 1/8 HP
Fuel consumption 3.7 L.B.s./hour
Ductible 12 in. dia. 12 ft. Length max
Ventilation fan mode
Includes regulator, 3/8 in. dia. 15 ft. L hose, and Thermostat single stage NEMA 4 in. 18 in.cord
Diagnostic lights
Third-party certified for safety in US and Canada
24.8 in. L 14.5 in. W 16.2 in. H
2 Year warranty

Downloads
Product Manual (PDF Download)