JME ProG Plus 1 in. Fuel Dispensing Hose – Hose Only

Description

JME ProG Plus 1 in. Fuel Dispensing Hose JME’s ProG Plus Fuel Dispensing Hose is UL listed and suitable for transferring gasoline, diesel, ethanol blends, and biodiesel blends (up to E10). Constructed with an inner tube made from nitrile rubber (NBR) and a chlorinated polyethylene (CPE) cover to protect the hose from external elements. Notes: Hose only (no ends). Hose is priced by the foot. Available in lengths from 5 ft. up to 200 ft. Features Nitrile rubber (NBR) inner tube provides excellent resistant to fuel and petroleum-based fluids Chlorinated polyethylene (CPE) cover protects against external elements and prolongs the hose’s lifespan Reinforced with a single layer steel wire braid which provides electrical conductivity for static dissipation Hose is manufactured and tested in accordance with the requirements of UL330 Specifications Series: ProG Plus Type: Fuel Dispensing Hose Inside Diameter (ID): 1 in. (25.4 mm.) Nominal Outside Diameter (OD): 1.38 in. (35.1 mm.) Nominal Hose Ends: None – Hose Only Length: Per ft. Inner Tube: Nitrile Rubber (NBR) Outer Cover: Chlorinated Polyethylene (CPE) – Black Reinforcement: Single Layer, Steel Wire Braid (Electrically Conductive) Minimum Bend Radius: 5.91 in. (150 mm.) Maximum Working Pressure: 250 PSI (17.24 bar) Minimum Burst Pressure: 1,000 PSI (68.95 bar) Operating Temperature Range: -40°F to 158°F (-40°C to +70°C) Fluid Compatibility: Gasoline, Diesel, Ethanol Blends and Biodiesel Blends (up to E10) Compliance: UL Listed Weight: 0.60 lbs./ft. Downloads Product Drawing (PDF Download)