GPI FLOMEC® G-100-3A-2 1 in. Stainless Steel Meter w/Sanitary Clamp Fitting – 6.7 to 67 GPM, 40 Mesh

Description

The GPI FLOMEC GSCPS meter meets the strict 3-A Sanitary Standards using the new “Third Party Verification (TPV) program for any food and beverage application. Our methods of design, construction and traceability of components have been reviewed and approved. The internals of this meter are machined or polished to meet 3-A self-draining and cleaning requirements. The GSCPS Meter meets Clean in Place (CIP), Steam in Place (SIP) and Clean Out of Place (COP) requirements.
This sanitary clamp flow meter is made with PEEK and stainless steel components and is an excellent choice for milk products and other beverages.

Features

Meets Clean in place (CIP), Steam in place (SIP),and Clean out of place(COP) requirements for use in any sanitary procedure that works best for the application
High quality
Extremely accurate
Sanitary clamp fittings
3A sanitary standards
2-Wire Sine wave pulse magnetic pick-up coil with 10 ft of shielded cable
Expansive working temperature: -100° F to 250°F ( -73° C to 121°C) to work in various stages of food and beverage processes

Specifications

Design Type: Turbine
Pipe Size: 1 in
Connection Type: 1 1/2 in. Tri-Clamp
Pickup Coil Type: 2 Wire
Flow Rate: 6.7 to 67 GPM ( 25 to 252 LPM)
Mesh: 40
Fitting: Sanitary Clamp
Accuracy: ±0.5% Linearity
Repeatability: ±0.1%
Operating Temperature: -100ºF to 225ºF (-74ºF to 107ºC), for SIP up to an hour 285ºF ( 140ºC)
Frequency: 100 to 1000 Hz
Approvals: 3A Approved Sanitary Rating, CE, CIP,COP, SIP
Pressure Rating: Limited by fitting size, clamp size, & temp.
Wetted Materials:

316 Stainless Steel Housing
Nickel Plated CD4MCu Stainless Steel Rotor
316 Stainless Steel Rotor Supports
316 Stainless Steel Shaft
PEEK Sleeve Bearings
PEEK Thrust Bearings
300 Series Stainless Steel Rings

Liquids

Milk
Water
Light Oils
Beer
Alcohols
Filtered Wine
Deionized Water
Vinegar
Juice
CIP Solution

Downloads
GPI Flomec G Series Turbines Owners Manual (PDF Download)