ARO 3:1 Ratio High Pressure 1 in. NPTF Aluminum Air Diaphragm Pump w/ PTFE Diaphragms, Stainless Steel Balls & Seats

Description

ARO’s pneumatic 3:1 ratio, high pressure diaphragm pumps provide effective flow rates up to 24 GPM at pressures up to 300 PSI. This pump can produce up to 300 PSI, at about half the flow rate of a standard diaphragm pump by utilizing two power pistons that drive the fluid handling diaphragms. The compact size and footprint makes this a smart choice for a wide variety of markets and OEM’s. This pump is useful for feeding filter presses, the transfer of paint, recirculation and high solid coatings, inks, adhesives, filled material, drilling grout, caulking, solvent reclamation and resins.
Model
#: PH10A-ASS-SST

Features

Generates nearly 300 PSI on standard 100 PSI shop air
Stall-Free
Exceptional material compatibility
Easy to maintain
Ideal transfer of paint recirculation and high solid coatings, inks, adhesives, filled material, drilling grout, caulking, solvent reclamation and resins

Specifications

Ratio: 1:1
Maximum Flow: 26 GPM (98.4 LPM) flooded inlet, 15 GPM (45.6 LPM) at 125 PSI back pressure
Displacement Per Cycle: 0.06 Gal (0.23 L)
Air Inlet: 3/8″ NPTF
Fluid Inlet/Outlet: 1″ NPTF
MaOperating Pressure: 100 PSI (6.9 BAR)
Suspended Solids MaDia.: 1/8″ (3.2 mm)
MaDry Suction Lift: 5 – 6 Ft. (1.5 – 1.8 m)
Sound Level (70 PSI, 60 Cycles/Min): 84.5 db(A)
Center Section: Aluminum
Wetted Parts: Stainless steel
Hardware: Stainless steel
Seat / Ball Material: 316 Stainless steel
Diaphragm Material: PTFE (Teflon)

Downloads
Product Manual (PDF Download)